Hey there, fellow drivers! Ever thought about upgrading your ride with a dash cam? Well, the Uniden iGO Cam 90R is a fantastic choice, and trust me, the Uniden iGO Cam 90R installation process isn't as scary as it sounds. In fact, with a little bit of patience and this guide, you'll be rolling with a new dash cam in no time. We'll walk through everything from unboxing to the final setup, making sure you understand each step. Let's get started!

What You'll Need Before Installation

Before you even think about cracking open the box, let's gather your arsenal. Having the right tools and knowing what you're dealing with makes the Uniden iGO Cam 90R installation a breeze. So, here's what you'll need:

• Your Uniden iGO Cam 90R Kit: Make sure everything is in the box. Check for the dash cam unit, the front and rear cameras (if applicable), the power adapter (usually for the car's cigarette lighter), the mounting brackets, and any included screws or adhesive pads.
• A MicroSD Card: This is super important! The dash cam records video onto a microSD card. You'll need to purchase one separately if it's not included. Make sure it's a high-quality card with enough storage (32GB, 64GB, or even 128GB are good options). A Class 10 or UHS-I rating is recommended for smooth recording.
• A Microfiber Cloth: This is essential for cleaning your windshield and camera lenses. You want to ensure the recording is clear.
• A Plastic Pry Tool (Optional): If you plan on hardwiring the dash cam (connecting it directly to your car's electrical system), a plastic pry tool will help you safely tuck the wires behind your car's trim.
• A Multimeter (Optional): If you're hardwiring, a multimeter will help you identify a suitable fuse for power.
• Zip Ties or Wire Clips: These are your best friends for keeping the wires neat and tidy, preventing them from dangling and obstructing your view.
• Your Car's Manual: This is always a good idea, particularly if you are unsure about any of your car's electrical systems.

Got everything? Awesome! Let's get into the nitty-gritty of the Uniden iGO Cam 90R installation.

Step-by-Step Installation Guide

Alright, buckle up, because here's how to install the Uniden iGO Cam 90R. I'll break it down into easy-to-follow steps.

Step 1: Preparing the Front Camera

First things first, let's get that front camera ready. Remove any protective film from the camera lens. Then, locate the mounting bracket that came with your Uniden iGO Cam 90R. This is typically an adhesive mount or a suction cup mount. If it's an adhesive mount, clean the area on your windshield where you plan to stick the camera. Use the microfiber cloth to remove any dirt, dust, or grease. Then, peel off the adhesive backing and firmly press the mount onto the windshield. Make sure it's positioned where it won't obstruct your view but still captures a good view of the road. If you're using a suction cup mount, attach it to the windshield and make sure it is secure. Ensure the camera lens is clean so you can see properly.

Step 2: Mounting the Front Camera

Now, attach the front camera to the mounting bracket. Most brackets have a simple clip or sliding mechanism. Make sure the camera is securely attached. Adjust the camera's angle to point it toward the road, making sure it's level. You can usually rotate the camera to get the perfect angle. Once you have it positioned, tighten any screws or locking mechanisms to keep it in place. Make sure the camera is not obstructing your view.

Step 3: Installing the Rear Camera (If Applicable)

If your Uniden iGO Cam 90R includes a rear camera, it's time to install it. Locate the rear camera and its mounting bracket. Clean the area on your rear windshield where you want to mount it. Usually, this is near the top center or to the side, but make sure it doesn't interfere with your defroster. Use the microfiber cloth to clean the area. Attach the adhesive mount, just like you did with the front camera. Then, attach the rear camera to the bracket and adjust its angle to get the best view of the road behind you. Double-check that the camera lens is clean. Remember, the placement of the rear camera and how you route the wires will affect the success of your Uniden iGO Cam 90R installation.

Step 4: Routing the Cables

This is where things can get a little tricky, but it's crucial for a clean installation. The goal is to hide the wires as much as possible. Start with the front camera's power cable. Run the cable from the camera, along the top of your windshield, and tuck it into the headliner (the fabric on the roof of your car). You can use a plastic pry tool to gently push the wire into the gaps between the headliner and the windshield. Continue routing the cable down the side of the windshield, along the A-pillar (the post that supports the windshield), and down to the dashboard. You can tuck the cable behind the weather stripping (the rubber seal around the door) to hide it. If you're installing a rear camera, run its cable from the rear camera, along the roof, and down the side of your car, following the same method. Use zip ties or wire clips to secure the cables and prevent them from dangling. Make sure the cables do not interfere with your airbags.

Step 5: Connecting the Power

Now, it's time to connect the power. The Uniden iGO Cam 90R usually comes with a power adapter that plugs into your car's cigarette lighter or 12V power outlet. Plug the power adapter into the outlet and connect the other end to the front camera. If you're hardwiring the camera, you'll need to use the hardwire kit (if included) and connect it to your car's fuse box. This requires a bit more knowledge of your car's electrical system, so consult your car's manual or a professional if you're not comfortable with this step. Make sure the power cable is securely connected.

Step 6: Testing and Configuration

Once everything is connected, turn on your car and check if the dash cam powers on. If it does, the display should show a live feed from the camera. If you have a rear camera, check its feed as well. Now, it's time to configure the settings. Access the dash cam's menu (usually through the buttons on the device or a touchscreen). Set the date and time, adjust the video resolution, and configure any other desired settings, such as loop recording duration, G-sensor sensitivity (for impact detection), and parking mode settings. Test the camera by recording a short video and reviewing it to ensure everything is working correctly. Make sure you understand the settings of your Uniden iGO Cam 90R installation.

Troubleshooting Common Installation Issues

Even with the best instructions, you might run into a few snags. Here are some common problems and how to fix them during your Uniden iGO Cam 90R installation:

• Camera Not Powering On: Double-check that the power adapter is plugged in securely and that the car's power outlet is working. Try a different outlet or fuse if necessary. Make sure that the camera is properly connected.
• No Recording: Make sure the microSD card is inserted correctly and formatted in the camera. Also, check that the recording setting is enabled in the menu.
• Poor Video Quality: Clean the camera lens and windshield. Adjust the camera angle for the best view. Consider adjusting the video resolution in the settings.
• Rear Camera Not Working: Check the connection between the front and rear cameras and the wiring. Make sure the rear camera is properly connected.
• Wires Visible: Take the time to route the wires properly, tucking them behind the headliner, trim, and weather stripping. Use zip ties or wire clips to secure the wires and keep them out of sight.

Final Thoughts and Tips for a Smooth Installation

Congrats! You've successfully installed your Uniden iGO Cam 90R! To wrap things up, here are some final tips to ensure a smooth and successful installation.

• Read the Manual: Always read the user manual that comes with your dash cam. It contains specific instructions and troubleshooting tips for your model.
• Take Your Time: Don't rush the installation. It's better to take your time and do it right than to cut corners and end up with a messy or faulty setup.
• Test Everything: After the installation, test all the features of your dash cam to make sure everything is working as expected.
• Keep it Clean: Regularly clean the camera lenses and windshield to ensure the best video quality.
• Consider Professional Installation: If you're not comfortable with any of the steps, consider having a professional install the dash cam. It's better to be safe than sorry!

Installing the Uniden iGO Cam 90R is a rewarding experience. It gives you peace of mind knowing you have a reliable witness on the road. Drive safe, and enjoy your new dash cam!